Pulse Bag Dust Collector for Dust Treatment Equipment in Mine Workshop

Pulse Bag Dust Collector for Dust Treatment Equipment in Mine Workshops

The pulse bag dust collector is a type of dust removal equipment developed by our company with the assistance of relevant design and research institutes, based on summarizing similar domestic and international products. Its performance meets the level of similar domestic products. It is an ideal dust removal device widely used in the dust source management of production in industries such as steel, metallurgy, power, chemical, woodworking, and mining, improving working conditions and recovering useful materials.

This series of dust collectors consists of a shell, ash hopper, support ash discharge device, and a pulse cleaning system, among other components. When dust-laden gas enters the dust collector from the air inlet, it first encounters the inclined baffle in the middle of the inlet, causing the airflow to turn and flow into the ash hopper. At the same time, the flow velocity slows down, allowing coarser dust particles in the gas to reverse direction under inertia and gravity, passing through filter bags equipped with internal metal frames. Under the action of various dust removal mechanisms, the dust is captured on the outer surface of the filter bags. The purified gas enters the clean air chamber, collects in the outlet duct, and is discharged by the induced draft fan.

The dust collector shell is divided into several independent compartments by partitions. As filtration continues, the dust accumulation on the outer surface of the filter bags gradually increases, and the resistance of the dust collector also rises. To ensure the normal operation of the system, the resistance of the dust collector should be maintained within a limited range (approximately 1200~1500 Pa). Therefore, the accumulated dust on the surface of the bags must be cleared to reduce equipment resistance. Each dust collection compartment is equipped with a row of pulse valves for cleaning. The pulse valves open in sequence, injecting high-pressure air into each row of filter bags, causing the bags to momentarily expand and thereby clear the accumulated dust on their surfaces. The pulse injection width and cleaning cycle for each dust collection compartment are controlled by a dedicated programmable cleaning controller.

After-Sales Service for Dust Filter ElementsPulse Bag Dust Collector for Dust Treatment Equipment in Mine Workshops

1. Due to the wide variety of filter element products and the numerous factors involved in technical parameters, the actual product may differ from the images. The pictures are for reference only. The actual received product shall prevail, and the online listed price may differ from the actual price. Please contact us for accurate information.

2. Shipping cost explanation: The shipping cost is borne by our company.

3. Actual price: Due to market fluctuations, the actual price may vary. The specific price shall be determined through negotiation between both parties.

4. Transaction method: Payment before shipment.

5. Delivery cycle: The specific cycle depends on the model. Due to the wide variety of filter element models, the general production cycle for filter elements is 3-5 days. The actual cycle shall be determined by our company.

6. Return and exchange policy: After confirming the model/sample, our company will produce according to the model/sample. If the product indeed has quality issues, our company promises to exchange or accept returns, with the shipping cost borne by our company. Note: The costs incurred from returns may significantly increase the customer's expenses. The time delays and losses caused by returns and exchanges may far exceed the value of the goods themselves. (To avoid the above situations, please communicate and confirm with our company before purchasing.)Pulse Bag Dust Collector for Dust Treatment Equipment in Mine Workshops